LENOVO THINKSYSTEM 2U Rack-Mount 16GB HDD 3YW （ 7Z73S08H00 )

ThinkSystem SR650 V2 Intel Xeon Silver 4310T 10C 105W 2.3GHz

- ThinkSystem 16GB TruDDR4 3200 MHz (2Rx8 1.2V) RDIMM

- 8x2.5" SAS/SATA HS HDD Backplane

- RAID 530-8i PCIe 12Gb Adapter

- Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter

- 2U PCIe Gen4 x16/x8/x8 Riser 1 or 2

- 1100W (230V/115V) v2 Platinum Hot-Swap Power Supply

- 2.8m, 13A/100-250V, C13 to C14 Jumper Cord

- XClarity Controller Standard to Enterprise Upgrade

- Toolless Slide Rail Kit v2 with 2U CMA

- 3yrs Onsite Warranty

CPU : One or two third-generation Intel Xeon Scalable processor (formerly codenamed "Ice Lake").

Supports processors up to 40 cores, core speeds of up to 3.6 GHz, and TDP ratings of up to 270W

Memory : 32 DIMM slots with two processors (16 DIMM slots per processor). Each processor has 8 memory

channels, with 2 DIMMs per channel (DPC). Lenovo TruDDR4 RDIMMs and 3DS RDIMMs are

supported. DIMM slots are shared between standard system memory and persistent memory.

DIMMs operate at up to 3200 MHz at 2 DPC.

Memory Capacity: With RDIMMs: Up to 4TB by using 32x 128GB 3DS RDIMMs

With Persistent Memory: Up to 6TB by using 16x 128GB 3DS RDIMMs and 16x 256GB Pmem modules

Disk Drive Bays : Up to 20x 3.5-inch or 40x 2.5-inch hot-swap drive bays:

Front bays can be 3.5-inch (8 or 12 bays) or 2.5-inch (8, 16 or 24 bays)

Middle bays can be 3.5-inch (4 bays) or 2.5-inch (8 bays)

Rear bays can be 3.5-inch (2 or 4 bays) or 2.5-inch (4 or 8 bays)

Combinations of SAS/SATA, NVMe, or AnyBay (supporting SAS, SATA or NVMe) are available

The server also supports these drives for OS boot or drive storage:

Two 7mm drives at the rear of the server (in addition to any 2.5-inch or 3.5-inch drive bays)

Internal M.2 module supporting up to two M.2 drives

Maximum Internal Storage : 2.5-inch drives:

307.2TB using 40x 7.68TB 2.5-inch SAS/SATA SSDs

491.52TB using 32x 15.36TB 2.5-inch NVMe SSDs

96TB using 40x 2.4TB 2.5-inch HDDs

1.92TB using 2x 0.96TB 7mm SSDs

3.5-inch drives:

360TB using 20x 18TB 3.5-inch HDDs

153.6TB using 20x 7.68TB 3.5-inch SAS/SATA SSDs

92.16TB using 12x 7.68TB 3.5-inch NVMe SSDs

RAID Controller :  12x Onboard SATA ports (Intel VROC SATA RAID, formerly known as Intel RSTe RAID)

Up to 12x Onboard NVMe ports (includes Intel VROC NVMe RAID, with optional license for

non-Intel NVMe SSDs)

NVMe Retimer Adapter (supports Intel VROC NVMe RAID)

12 Gb SAS/SATA RAID adapters:

RAID 530i-8i (cacheless) supports RAID 0, 1, 10, 5, 50

RAID 530i-16i (cacheless) supports RAID 0, 1, 10

RAID 930-8i with 2GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60

RAID 930-16i with 4GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60

RAID 940-8i with 4GB or 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60

RAID 940-16i with 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60

RAID 940-32i with 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60

12 Gb SAS/SATA non-RAID: 430-8i, 430-16i and 440-16i HBAs

Optical Drive : No internal optical drive.

Network Controller : Dedicated OCP 3.0 SFF slot with PCIe 4.0 x16 host interface. Supports a variety of 2-port and 4-

port adapters with 1GbE, 10GbE and 25GbE network connectivity. One port can optionally be

shared with the XClarity Controller (XCC) management processor for Wake-on-LAN and NC-SI

support.

PCI Slots : Up to 8x PCIe 4.0 slots, all full height slots and with rear access, plus a slot dedicated to the OCP

adapter. Slot availability is based on riser selection and rear drive bay selection. Slots 4-8 require two processors.

Slots are configured using three riser cards. Riser 1 (slots 1-3) and Riser 2 (slots 4-6) are installed

in slots in the system board, Riser 3 (slots 7-8) is cabled to ports on the system board.

A variety of riser cards are available. See the I/O expansion for details.

For 2.5-inch front drive configurations, the server supports the installation of a RAID adapter or HBA

in a dedicated area that does not consume any of the PCIe slots.

I/O Ports : Front: 1x USB 3.1 G1 (5 Gb/s) port, 1x USB 2.0 port (also for XCC local management), External

diagnostics port, optional VGA port.

Rear: 3x USB 3.1 G1 (5 Gb/s) ports, 1x VGA video port, 1x RJ-45 1GbE systems management port

for XCC remote management. Optional DB-9 COM serial port (installs in slot 3).

Internal: 1x USB 3.1 G1 connector for operating system or license key purposes

Power Supply : Up to two hot-swap redundant AC power supplies, 80 PLUS Platinum or 80 PLUS Titanium

certification. 500 W,750 W, 1100 W and 1800 W AC options, supporting 220 V AC. 500 W, 750 W

and 1100 W options also support 110V input supply. In China only, all power supply options support

240 V DC. Also available is a 1100W power supply with a -48V DC input.

Video： G200 graphics with 16 MB memory with 2D hardware accelerator, integrated into the XClarity

Controller. Maximum resolution is 1920x1200 32bpp at 60Hz.

System Management : Operator panel with status LEDs. Optional External Diagnostics Handset with LCD display. Models

with 8x or 16x 2.5-inch front drive bays can optionally support an Integrated Diagnostics Panel.

XClarity Controller (XCC) embedded management, XClarity Administrator centralized infrastructure

delivery, XClarity Integrator plugins, and XClarity Energy Manager centralized server power

management. Optional XClarity Controller Advanced and Enterprise to enable remote control functions.

OS Supported : Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi.

See the Operating system support section for specifics.

Security features: Chassis intrusion switch, Power-on password, administrator's password, Trusted Platform Module

(TPM), supporting TPM 2.0. In China only, optional Nationz TPM 2.0. Optional lockable front security bezel.

contact us at +6012-256 8022 for further information. or email to [email protected]