Ergotron WorkFit-S Single LD Workstation with Worksurface (black) Standing Desk Attachment - Front Clamp (33-350-200)

Screen : ≤27"
Capacity : ≤18 lbs ; ≤8.2 kg *
Lift : 22.8" ; 57.9 cm †
Tilt : 30°
Rotation : 360°
Vesa : MIS-D
Warranty : 5 years

Description: WorkFit-S Sit-Stand Workstation for Single LCD Monitor, LD, with Worksurface and Large Keyboard Tray

Includes height-adjustment column, desk clamp, LCD pivot, worksurface, large keyboard tray

NOTE: Extra-long cables may be required to span between standing and sitting heights

Can be configured to hold a laptop instead of an LCD display: also order the LX Notebook Tray (50-193-200)

* Weight Capacity: Maximum total load on height-adjustment assembly = 18 lbs (8.2 kg). LCD weight = 6–16 lbs (2.3–7.3 kg), worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 18 lbs (8.2 kg)
† Lift Range: LCD and keyboard adjust 18" (46 cm) in tandem; LCD adjusts 4.8" (12.2 cm) independently; maximum LCD height adjustment = 22.8" (58 cm). The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5" (13 cm)

Desk Clamp attaches to surface edge .47" to 2.4" (1.2 to 6 cm) thick

NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment

Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity

Keyboard tray can be installed in nine potential locations relative to the monitor: centered or off-set to left or right; at standard focal distance or 2.2" (5.6 cm) or 4.4" (11.2 cm) farther away

Worksurface Dimensions: 0.25"H x 23"W x 15"D (6 x 585 x 380 mm)
Keyboard Tray Dimensions: 0.25"H x 27"W x 9"D (6 x 685 x 226 mm)

Durable, easy-to-clean exterior composed of aluminium, high-grade plastic and powder coated painted steel

Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)

This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)