LENOVO THINKSYSTEM 1U Rack-Mount 16GB HDD 3YW ( 7Z71S07J00 )

ThinkSystem SR630 V2 Intel Xeon Silver 4309Y 8C 105W 2.8GHz

- 16GB TruDDR4 3200 MHz (2Rx8 1.2V) RDIMM

- 8x 2.5" Hot-Swap SATA/SAS HDD Backplane\

- RAID 530-8i PCIe 12Gb Adapter

- 1U PCIe Gen4 x16/x16 Riser 1

- 1U LP+FH BF Riser Cage NVFF5.0 Riser 1

- Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter

- 1100W (230V/115V) v2 Platinum Hot-Swap Power Supply

- 2.8m, 13A/100-250V, C13 to C14 Jumper Cord

- XClarity Controller Standard to Enterprise Upgrade

- Toolless Slide Rail Kit v2 with 1U CMA

- 3yrs Onsite Warranty

CPU : One or two third-generation Intel Xeon Scalable processor (formerly codenamed "Ice Lake"). Supports processors up to 40 cores, core speeds of up to 3.6 GHz, and TDP ratings of up to 270W.

Memory : 32 DIMM slots with two processors (16 DIMM slots per processor). Each processor has 8 memory channels, with 2 DIMMs per channel (DPC). Lenovo TruDDR4 RDIMMs and 3DS RDIMMs are supported. DIMM slots are shared between standard system memory and persistent memory. DIMMs operate at up to 3200 MHz at 2 DPC.

Maximum Memory : With RDIMMs: Up to 4TB by using 32x 128GB 3DS RDIMMs With Persistent Memory: Up to 6TB by using 16x 128GB 3DS RDIMMs and 16x 256GB Pmem modules

Disk Drive Bays : Up to 4x 3.5-inch or 12x 2.5-inch or 16x EDSFF hot-swap drive bays:Front bays can be one of the following: 10x 2.5-inch hot-swap: All AnyBay 10x 2.5-inch hot-swap: All NVMe 10x 2.5-inch hot-swap: 6x SAS/SATA + 4x AnyBay 10x 2.5-inch hot-swap: 6x SAS/SATA + 4x NVMe 10x 2.5-inch hot-swap: 6x SAS/SATA + 2x AnyBay + 2x NVMe 8x 2.5-inch hot-swap SAS/SATA 16x EDSFF E1.S form factor hot-swap drives 4x 3.5-inch hot-swap SAS/SATA 4x 3.5-inch hot-swap AnyBay Rear can be one of the following: 2x 2.5-inch hot-swap SAS/SATA bays 2x 2.5-inch hot-swap NVMe bays 2x 7mm 2.5-inch hot-swap SATA bays 2x 7mm 2.5-inch hot-swap NVMe bays Internal M.2 module supporting up to two M.2 drives, for OS boot and drive storage support

Maximum Internal Storage : 2.5-inch drives: 92.16TB using 12x 7.68TB 2.5-inch SAS/SATA SSDs 184.32TB using 12x 15.36TB 2.5-inch NVMe SSDs 28.8TB using 12x 2.4TB 2.5-inch HDDs 1.92TB using 2x 960GB 7mm SSDs EDSFF drives 64TB using 16x 4TB EDSFF NVMe SSDs 3.5-inch drives: 72TB using 4x 18TB 3.5-inch HDDs 30.72TB using 4x 7.68TB 3.5-inch SAS/SATA SSDs 30.72TB using 4x 7.68TB 3.5-inch NVMe SSDs

RAID Controller : 12x Onboard SATA ports (Intel VROC SATA RAID, formerly known as Intel RSTe RAID) Up to 12x Onboard NVMe ports (includes Intel VROC NVMe RAID, with optional license for non-Intel NVMe SSDs) NVMe Retimer Adapter (supports Intel VROC NVMe RAID) 12 Gb SAS/SATA RAID adapters: RAID 530i-8i (cacheless) supports RAID 0, 1, 10, 5, 50 RAID 530i-16i (cacheless) supports RAID 0, 1, 10 RAID 930-8i with 2GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60 RAID 930-16i with 4GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60 RAID 940-8i with 4GB or 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60 RAID 940-16i with 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60 12 Gb SAS/SATA non-RAID: 430-8i and 430-16i HBAs

Optical Drive : No internal optical drive.

Network Controller : Dedicated OCP 3.0 SFF slot with PCIe 4.0 x16 host interface. Supports a variety of 2-port and 4-port adapters with 1GbE, 10GbE and 25GbE network connectivity. One port can optionally be shared with the XClarity Controller (XCC) management processor for Wake-on-LAN and NC-SI support.

PCI Slots : Up to 3x PCIe 4.0 slots, all with rear access, plus a slot dedicated to the OCP adapter. Slot availability is based on riser selection and rear drive bay selection. Slot 3 requires two processors.Four choices for rear-access slots:3x PCIe 4.0 x16 low-profile slots 1x PCIe 4.0 x16 full-height half-length slot + 1x PCIe 4.0 x16 low-profile slot 1x PCIe 4.0 x16 low-profile slot (also supports 2x rear 2.5-inch drive bays) 2x PCIe 4.0 x16 low-profile slot (also supports 2x rear 7mm 2.5-inch drive bays) For 2.5-inch front drive configurations, the server supports the installation of a RAID adapter or HBA in a dedicated area that does not consume any of the PCIe slots.

I/O Ports : Front: 1x USB 3.1 G1 (5 Gb/s) port, 1x USB 2.0 port (also for XCC local management), External diagnostics port, optional VGA port.Rear: 3x USB 3.1 G1 (5 Gb/s) ports, 1x VGA video port, 1x RJ-45 1GbE systems management port for XCC remote management. Optional DB-9 COM serial port (installs in slot 3).Internal: 1x USB 3.1 G1 connector for operating system or license key purposes

Power Supply : Up to two hot-swap redundant AC power supplies, 80 PLUS Platinum or 80 PLUS Titanium certification. 500 W, 750 W, 1100 W and 1800 W AC options, supporting 220 V AC. 500 W, 750 W and 1100 W options also support 110V input supply. In China only, all power supply options support 240 V DC. Also available is a 1100W power supply with a -48V DC input.

System Management : Operator panel with status LEDs. Optional External Diagnostics Handset with LCD display. Models with 8x 2.5-inch front drive bays can optionally support an Integrated Diagnostics Panel. XClarity Controller (XCC) embedded management, XClarity Administrator centralized infrastructure delivery, XClarity Integrator plugins, and XClarity Energy Manager centralized server power management. Optional XClarity Controller Advanced and Enterprise to enable remote control functions.

OS Supported : Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi. See the Operating system support section for specifics.

contact us at +6012-256 8022 for further information. or email to [email protected]